|
The R-Series Benchtop
Conductivity Meters. Simply ahead of its time!
The new R series Conductivity
meters are designed for high performance with easy operation along with
2 models to choose from depending upon your requirements.
Measure Conductivity,
Resistivity, Salinity, Concentration, and Temperature with option for
ambient temperature and humidity.
Features:
- The DKK-TOA exclusive
calibration memory function. Intelligent Sensor "Calibration Memory"
- The electrode stores 3 sets of calibration data in a microchip of
the electrode including calibration date, sensor type, ID #, etc.. The
information is downloaded to the meter when attached. Always a documented
electrode with complete paper trail.
- GLP Compliant-
Compatible with electronic recording and electronig signature regulations
under 21 CFR Part 11.
- SOP Documentation
guide available.
- On-board Help function
at your fingertips
- USB and LAN-network
interface connectivity
- Password protection
and enhanced printing functions. User restricted access.
- Calibration data
storage function (20 historical sets of data), including sensor ID,
cal data, zero potential and slope. Sensor replacement function and
alarm indications. Diagnostic messages are displayed when an error indication
is found.
- Easy to read and
use menu driven operation, back lit large LCD display.
- Conductivity, Resistivity,
Concentration, salinity and temperature measurements performed. (CM-30R)
- Ambient temperature
and humidity logging available.
- Data storage function-
up to 300 sets of measured data can be stored in memory.
- System expandability)-
optional peripherals can be added such as turn tables (12,18, or 36
samples) and electrode selector (max 5 electrodes).
2 Models for conductivity
are available depending upon the options and accuracy that are required.
The CM-30R is the
standard version compatible with GLP / CFR part 11 regulations or for
those requiring a Conductivity meter witht the high end features and automation
capabilities. Perform a concentration calculation, interface a turntable
for automation, connect to a LAN, etc.
The CM-25R is the
simplified version for those requiring a basic Conductivity meter without
the high end features and automation capabilities.
Also consider the
R-series pH Meters and the Mutli-Function Meter for pH. ORP, Ion, Conductivity,
and dissolved Oxygen measurement. All in one instrument!
|
Main
Units
| CM-30R |
Conductivity
Meter w/Standard Accessories. |
| CM-25R |
Economical
Conductivity Meter w/standard Accessories |
Optional
equipment and accessories for CM-30R / CM-25R
| 6949070K
(HM-30R, CM-30R, MM-30R) |
Ambient
Temperature and humidity sensor |
| 6949080K
(HM-30R, CM-30R, MM-30R) |
Remote
switch for auto hold, data memory, and print key |
| EPS-R |
External
printer unit w/cable, 60mm wide |
| 118B603 |
Connection
cable to external printer |
| P000119 |
60mm
wide printer Paper, 20 roll/pk |
| ORD00001 |
Ink
Ribbon Cartridge for External Printer, 1 pc |
| G-LOG2 |
Data
Acquisition Software for PC to CSV format. (Requires 118B604 RS-232C
cable, 2m) |
| R-LOG |
USB/LAN
data collection software for PC to CSV format. |
| ES-1G
(HM-30R, MM-60R) |
Electrode
Selector for up to 5 pH, ORP, or Ion electrodes |
| ES-1GC
(CM-30R, MM-60R) |
Conductivity
Cell Selector for up to 5 Cond. Cells |
| ES-1GC
(MM-60R) |
Electrode
Selector for up to 5 DO electrodes |
| AH-1G |
Automatic
Electrode Calibration Unit |
| AC-1V
(HM-30R, CM-30R. MM-60R) |
Control
Box allows for upper and lower pH limits to be controlled by 100 V
relay for reagent pump/pH control.. |
| OGC00002 |
RS-232
Conection Cable, 2m. |
| PC-1G
(HM-25R, HM-30R, MM-60R) |
pH
Checker / Calibration unit |
| EC-1G
(CM-25R, CM-30R, MM-60R) |
Electrical
Conductivity Check test plug. |
|
TC-1G (HM, CM, or MM R-series) |
Temperature
Checker test plug. |
| OIF00001 |
Electrode
Stand Set |
| OIB00001 |
Electrode
Holder (Electrode Attachment Not included) |
| OIB00004
- OIB00008 |
Electrode
Attachment, G/04, J/05, Ion/06, DP/07, N/08 |
|
Stirrers
assemblies: |
| ST-15 |
Magnetic
stirrer |
| S-HLD-S |
Electrode
Holder |
| S-STD-S |
Electrode
Stand |
| ST-20A |
Overhead
Rod type stirrer and electrode holder |
|
Automatic
Samplers: |
| TTT-510-12 |
Automatic
turntable unit, 12 samples.(uses 200ml tall beakers) |
| TTT-510-18 |
Automatic
turntable unit, 18 samples.(uses 100ml tall beakers) |
| TTT-510-32 |
Automatic
turntable unit, 32 samples.(uses 50ml tall beakers) |
| TTT-510-60 |
Automatic
turntable unit, 60 samples.(uses 20ml tall beakers) |
| OGC00001 |
G
Series meter to TTT-510 Connection Cable, 1.5M(std) |
| P000020 |
Waste
Water Valve |
| P000021 |
Waste
Water Valve, electric magnetic |
| P000022 |
Non-Aqueous
pump for reagent delivery |
| P000032 |
Propeller
Stirrer motor |
|
Additional
electode holders, connection cables, extensions, beakers, and accessories
also available. |
Conductivity
Cells for CM-30R / CM-25R (And CM-20J)
CT-57101B
(General Purpose)
Immersion type
|
EC:
100uS/m to 10S/m (1uS/cm to 100ms/cm), 0-100C., Cell const. 100E10-1m,
Min. 4ml sample volume. Diam 14mmx26mm. Built in temp. Calibration
Memory function |
CT-57101C
(Low Range Cond.)
Immersion type |
EC:
5uS/m to 1S/m (0.05uS/cm to 10ms/cm), 0-100C., Cell const. 10E10-1m,
Min. 6ml sample volume. Diam 14mmx42mm. Built in temp. Calibration
Memory function |
|
CT-57101A (High
Range Cond.)
Immersion type
|
EC:
1mS/m to 100S/m (10uS/cm to 1S/cm), 0-100C., Cell const. 1000E10-1m,
Min. 39ml sample volume. Diam 36mmx38mm. Built in temp. Calibration
Memory function |
CT-87101B
(General Purpose)
Flow Thru type |
EC:
100uS/m to 10S/m (1uS/cm to 100ms/cm), 0-100C., Cell const. 100E10-1m,
Cell volume is 4ml. Built in temp. Calibration Memory function |
CT-27111D
(Pure Water Use)
Flow Thru type |
EC:
5uS/m to 20S/m (0.05uS/cm to 200ms/cm), 0-80C., Cell const. 1E10-1m,
Cell volume is 8ml. Built in temp. Calibration Memory function. Note:
a seperate flow cell is required. CEF-22A (PP), or CEF-23A (SUS316) |
|
CT-87101C (Low
Range Cond.)
Flow Thru type
|
EC:
5uS/m to 1S/m (0.05uS/cm to 10ms/cm), 0-100C., Cell const. 10E10-1m,
Cell volume is15ml. Built in temp. Calibration Memory function |
CT-87102A
(High Range Cond.)
Flow Thru type
|
EC:
10mS/m to 100S/m (100uS/cm to 1ms/cm), 0-100C., Cell const. 2000E10-1m,
Cell volume is 1ml. Built in temp. Calibration Memory function. Note:
a rubber syringe septum or pump tube is required. |
C-50101B
(General Purpose)
Immersion type
for CM-20J |
EC:
100uS/m to 10S/m (1uS/cm to 100ms/cm), 0-100C., Cell const. 100E10-1m,
Min. 4ml sample volume. Diam 14mmx26mm. |
C-50101C
(Low Conductivity)
Immersion type
for CM-20J |
EC:
5uS/m to 1S/m (0.05uS/cm to 10ms/cm), 0-100C., Cell const. 10E10-1m,
Min. 6ml sample volume. Diam 14mmx42mm. |
C-50101A
(High Conductivity)
Immersion type
for CM-20J |
EC:
1mS/m to 100S/m (10uS/cm to 1S/cm), 0-100C., Cell const. 1000E10-1m,
Min. 39ml sample volume. Diam 36mmx38mm. |
| |
|
|
