|
The TTT-510 is an
automatic sample processing unit for titration, pH, ion and conductivity
automation. This fully automated system allows for the automatic processing
of either 12, 18, 36, or 60 samples and incorporates an external electrode
wash station for aqueous and solvent electrode conditioning. The TTT-510
is completely programmable and allows for multiple sequences.
Features
-Interface to a titrator, pH meter, ion meter or conductivity
meter.
-Manual, automatic and computer controlled via RS-232 interface.
-Complete sequence timing and rinsing control.
-External electrode wash station.
-Uses standard size beakers. 12 position is standard
-Removable sample turntable.
Specifications
| Number
of beakers |
12, 18, 36, or 60 (specify when ordering) |
| Size
of beakers |
200
ml or 300ml tall for 12 position
100 ml tall for 18 position
30 ml or 50 ml tall for 32 position
20 ml for 60 position |
| Electrode
cleaning |
Aqueous
and non-aqueous |
| Alarm
|
End detection, buzzer & lamp alarm of cleaning solvent |
| Setting
of cleaning method |
Water and solvent reagent valve (specify) |
| Cleaning
time setting |
0 to 9999 seconds (Wash Timer) |
| Setting
electrode dip |
0
to 9999 seconds (Water Timer) |
| Stability
time setting |
settable |
| Power
source |
AC line, 50/60 Hz |
| Dimensions/Weight
|
405mm
(W) x 320mm (H) x 570mm (D), 21kgs |
| Interface
to models |
AUT-501
titrator |
Main
Unit
| TTT-510-1-3-1 |
for 12 sample beakers, AC115V |
| TTT-510-1-3-2 |
for
18 sample beakers, AC115V |
| TTT-510-1-3-3 |
for
36 sample beakers, AC115V |
| TTT-510-1-3-4 |
for 60 sample beakers, AC115V |
| TTT-510-1-3-5 |
for 100 sample beakers, AC115V (Special order only) |
Standard Accessories
| See
Table Plate info |
12,
18, 36, or 60 position turntable |
1
Pce |
| See
Electrode Cartridge info |
Electrode
cartridge |
!
Pce |
| TTT-P001-C |
Polyethylene
tank for cleaning |
1
Pce |
| TTT-P001-W |
Polyethylene
tank for waste water |
1
Pce |
| TTT-P003 |
Float
switch for waste water |
1
Pce |
| TTT-P004 |
Float
switch for pure water |
1
Pce |
| TTT-P005 |
Waste
Water Hose |
1
Pce |
| TTT-P006 |
Rinse
Water Hose |
1
Pce |
|
End
Pin |
1
Pce |
|
Operation
manual |
1
Pce |
| HEX-ACL3 |
Power
cord |
1
Pce |
Automatic Sampler Configuration:
| TTT-510-12 |
Automatic
turntable unit, 12 samples.(uses 200 or 300ml tall beakers) |
Rec.
8x30mm stir bar |
| TTT-510-18 |
Automatic
turntable unit, 18 samples.(uses 100ml tall beakers) |
Rec.
8x30mm stir bar |
| TTT-510-32 |
Automatic
turntable unit, 36 samples.(uses 50ml tall beakers) |
Rec.
8x25mm stir bar |
| TTT-510-60 |
Automatic
turntable unit, 60 samples.(uses 20ml Cell) |
Rec.
5x15mm stir bar |
| OGC00005 |
AUT-501
to TTT-510 Connection Cable, 1m(std), 2m, 4m, 10m avail. |
|
| P000023 |
Air
Pump for forced air cleaning |
|
| P000020 |
Waste
Water Valve (pinch cock) for bubbling cleaning |
|
| P000021 |
Waste
Water Valve, electric magnetic, for bubbling cleaning |
|
|
Air
Pump for Bubbling |
|
| P000022 |
Non-Aqueous
chemical feed pump for chemical cleaning |
|
| P000032 |
Propeller
Stirrer motor, Over head type |
|
| TTT-31012 |
for
12 sample beakers |
| TTT-31018 |
for
18 sample beakers |
| TTT-31036 |
for
36 sample beakers |
| TTT-31060 |
for
60 sample beakers |
Table
Plate and Electrode Holder Cartridges
| S-ECT-12
|
for 12,18 sample beakers |
| V-ECT-24A |
for
36 sample beakers |
| S-ECT-24B |
for
36 sample beakers |
| S-ECT-25C |
for 36 sample beakers |
| V-ECT-36 |
for 60 sample beakers |
| -1
1 channel cartridge |
Used
for all table sizes |
| -2
1 channel cartridge |
for
12,18, 36 sample beakers |
| -3
2 channel cartridge |
for
12,18, 36 sample beakers |
| -4
2 channel cartridge |
for
12,18, 36 sample beakers |
| -5
2 channel cartridge |
for
12,18 sample beakers |
| Multi
cartridge |
for
12 sample beakers |
| for
sample suction |
Used
for all table sizes |
Note: 1) If using S-ECT-24C(2CH-2)
or S-ECT-36(1 CH-1) for titration, it is recommended to use trace volume
titration nozzle AST-P008 instead of normal titration nozzle.
2) Depending on sample and required analysis items, different type of
cleaning method is recommended for continuous measurement.
Connection Cables:
| OGC00005 |
AUT-501
to TTT-510 Connection Cable, 1m(std) |
| OGC00006 |
AUT-501
to TTT-510 Connection Cable, 2m |
| OGC00007 |
AUT-501
to TTT-510 Connection Cable, 4m |
| OGC00008 |
AUT-501
to TTT-510 Connection Cable, 10m |
Electrode Extension
Cables by electrode type:
| 5000HN1M |
GS-5000
Series (1m length) |
| 5000HN3M |
GS-5000
Series (3m length) |
| 5000HN5M |
GS-5000
Series (5m length) |
| 5200HN1M |
GS-5200
Series (1m length) |
| 5200HN3M |
GS-5200
Series (3m length) |
| 5200HN5M |
GS-5200
Series (5m length) |
| 5300HN1M |
GS-5300
Series (1m length) |
| 5300HN3M |
GS-5300
Series (3m length) |
| 5300HN5M |
GS-5300
Series (5m length) |
| 5400HN1M |
GS-5400
Series (1m length) |
| 5400HN3M |
GS-5400
Series (3m length) |
| 5400HN5M |
GS-5400
Series (5m length) |
| 5700HN1M |
GS-5700
Series (1m length) |
| 5700HN3M |
GS-5700
Series (3m length) |
| 5700HN5M |
GS-5700
Series (5m length) |
| 5700HN10M |
GS-5700
Series (10m length) |
|
